ser

«Regional Centre of Confirmation of Conformity» Call: +7 (499) 979-00-85 RU

Accreditation field

1. Technical regulation of the Customs Union “On safety of low voltage equipment” TR CU 004/2011

List of low voltage equipment subject to confirmation of conformity in the form of certification in compliance with technical regulation of the Customs Union “On safety of low voltage equipment” (TR CU 004/2011)

1. Electric devices for household use:

  • For cooking and storage of food and mechanization of kitchen work;
  • For handling (washing, ironing, drying, cleaning) of clothes of shoes;
  • For housekeeping;
  • For maintaining and regulation of microclimate indoors;
  • Sanitary;
  • For hair, nail and skin care;
  • For body warmth;
  • For vibromassage;
  • Gaming, sport and training equipment;
  • Audio and video devices, TV and radio receivers;
  • Sewing and knitting;
  • Power units, charging devices, voltage stabilizers;
  • For gardening;
  • For aquariums and garden reservoirs;
  • Electric pumps;
  • Light equipment and light sources;
  • Wiring devices;
  • Extension cords.

2. Personal electronic computing machines (personal computers).

3. Low voltage equipment plugged into personal electronic computing machines.

4. Electric tools (hand-held and transportable electric tools).

5. Electric musical instruments.

6. Cables, wires and cords.

7. Automatic circuit breakers, protection tripping units.

8. Electricity distribution devices.

9. Electro technical package electric control units.

2. Technical regulation “Electromagnetic compatibility of technological equipment” TR CU 020/2011

List of technological equipment, subject to confirmation of conformity in the form of certification in compliance with technical regulation of the Customs Union “Electromagnetic compatibility of technological equipment “ (TR CU 020/2011)

1. Electric devices for household use:

  • For cooking and storage of food and mechanization of kitchen work;
  • For handling (washing, ironing, drying, cleaning) of clothes of shoes;
  • For housekeeping;
  • For maintaining and regulation of microclimate indoors;
  • Sanitary;
  • For hair, nail and skin care;
  • For body warmth;
  • For vibromassage;
  • Gaming, sport and training equipment;
  • Audio and video devices, TV and radio receivers;
  • Sewing and knitting;
  • Power units, charging devices, voltage stabilizers;
  • For gardening; TR CU 020/2011
  • Electric pumps;
  • Light equipment;
  • Automatic circuit breakers with electronic control;
  • Protection tripping units with electronic control;
  • Electric arc welding equipment.

2. Personal electronic computing machines (personal computers).

3. Technical equipment plugged into personal electronic computing machines:

  • Printers;
  • Video display units (monitors);
  • Scanners;
  • Uninterruptible power supplies;
  • Active acoustic systems, AC powered;
  • Multimedia projectors.

4. Electric tools (hand-held and transportable electric tools).

5. Electric musical instruments.

3. List of technical regulation plants subject to confirmation of conformity in compliance with the requirements of technical regulation of Customs Union “On machines and equipment safety” TR CU 010/2011

List of technical regulation plants subject to confirmation of conformity in compliance with the requirements of technical regulation of Customs Union “On machines and equipment safety” in the form of certification (TR CU 010/2011):

1. Household use woodworking machines.

2. Snow and swamp-going vehicles and trailers for them.

3. Garage equipment for motor vehicles and trailers.

4. Agricultural machinery.

5. Mechanized (including electric) tools of small-scale mechanization for garden and forest use.

6. Animal, poultry farming and feed production machines.

7. Mechanized (including electric) tools.

8. Technological equipment for timber harvesting, timber yards and timber rafting:

  • Gasoline saws;
  • Chain electric saws;

9. Technological equipment for retail facilities, catering and food production.

10. Equipment for stripping, stoping and lining of mines:

  • Shearer-loaders;
  • Mechanized packages;
  • Mechanized shield supports for longworks;
  • Pneumatic tools.

11. Equipment for excavation:

  • Tunneling machines for coal and terrain;
  • Metallic shield supports for development workings.

12. Bottom lifts and mine transport equipment:

  • Shaft drag conveyors;
  • Shaft and mine winding machines.

13. Gadding equipment, blast hole loading and stemming equipment:

  • Pneumatic drills (jackhammers);
  • Pneumatic impact tools;
  • Holing machines for mining industry;

14. Ventilation and dust suppression equipment:

  • Mine fans;
  • Dust capture and suppression tools;
  • Oxygen compressors.

15. Weight-handling equipment, lifting cranes.

List of technical regulation plants subject to confirmation of conformity in compliance with the requirements of technical regulation of Customs Union “On machines and equipment safety” in the form of declaration of conformity (TR CU 010/2011)

1. Turbines and gas-turbine power units.

2. Exhaust fans.

3. Grinders.

4. Diesel generators.

5. Load handling equipment.

6. Conveyors.

7. Cable- and chain-driven electric chain blocks.

8. Industry floor trackless vehicles.

9. Chemical and oil and gas refining equipment.

10. Polymeric materials refining equipment.

11. Pumping equipment (pumps, pumping units and pumping sets).

12. Cryogenic, compressor, refrigerating, autogenic, gas-cleaning equipment:

  • Air-separation and rare gases units;
  • Equipment for gas treatment, gas and liquid purification, heat- and mass-exchange units of cryogenic systems and packages;
  • Compressors (air and gas driven);
  • Refrigeration plants.

13. Equipment for flame treatment of metals and for metallization of products.

14. Gas purification and dust –catching equipment.

15. Cellulose and paper equipment.

16. Papermaking equipment.

17. Oil-field, drilling geological prospecting equipment.

18. Technological equipment and devices for painting of engineering products.

19. Equipment for liquid ammonia.

20. Drinking water treatment and purification equipment.

21. Metal-working machines.

22. Forging machines.

23. Woodworking machinery (except household use woodworking machines).

24. Technological equipment for foundry production.

25. Welding and thermal spraying equipment.

26. Industrial tractors.

27. Car-lift trucks.

28. Bicycles (except children’s bicycles).

29. Machines for excavating and reclamation works, quarry development and maintenance.

30. Road machinery, equipment for construction mix preparation.

31. Building equipment and machines.

32. Equipment for construction materials industry.

33. Technological equipment for timber harvesting, timber yards and timber rafting (except Gasoline saws, chain electric saws).

34. Technological equipment for peat industry.

35. Industrial laundry equipment.

36. Equipment for dry cleaning, clothes and household units dyeing.

37. Equipment and machines for public services.

38. Industrial fans.

39. Industrial air conditioners.

40. Air heaters and air coolers.

41. Technological equipment for light industry.

42. Technological equipment for textile industry.

43. Technological equipment for chemical fibers, fiberglass and asbestos threads production.

44. Technological equipment for food, meat and dairy, fish industries.

45. Technological equipment for flour-and-cereals, mixed feed, grain storage industries.

46. Technological equipment for retail facilities, catering and food production.

47. Printing equipment.

48. Technological equipment for glass, porcelain, faience ad cable industries.

49. Heating boilers, operating on liquid and dry fuel.

50. Gas- and combined burners (except modular ones), operating on liquid fuel, equipment-integrated, designed for industrial technological use.

51. Water heating and heating units, operating on liquid and dry fuel.

52. Cutters:

  • Milling cutter with indexable carbide inserts;
  • Cut-off and slitting cutters made of rapid steel;
  • Carbide cutters.

53. Boring tools:

  • Lathe knives with brazed carbides;
  • Lathe knives with indexable carbide inserts.

54. Circular saws with carbide blades for woodworking.

55. Fitter’s and assembler’s tools with isolation handles for work in electric plants with voltage under 1000 V.

56. Hollow cutters:

  • Wood-milling hollow cutters with form-relieved teeth;
  • Wood-milling hollow cutters with steel of carbide blades;
  • Cylindrical interlocking hollow cutters.

57. Natural and artificial diamond instruments:

  • Diamond grinding wheels;
  • Diamond slitting wheel.

58. Synthetic super hard materials based on boron nitride tools (CBN tools):

  • Grinding wheels.

59. Industrial pipeline fittings.

60. Abrasive tools and materials:

  • Grinding wheels, including grinding wheels for hand tools;
  • Slitting wheels;
  • Polishing wheels;
  • Grinding flap wheels;
  • Endless grinding belts;
  • Fibrous grinding disks.